HexEntry — Confirmations (Kill‑Switch)

HexEntry Confirmations (Critical / Kill‑Switch)

These confirmations are designed to stop bad entries before they happen. If any mandatory confirmation fails, the entry is invalid — log the relevant error code and stand down.

Minute‑Lock: Context = M15, Execution = M5. Trading outside this frame is NSR (not standard).

HXC Namespace (HXC01–HXC12)

HXC confirmations are setup‑agnostic. They act as a kill‑switch and map into the six setups through a fixed matrix.

HXC01
State Lock
(NSR)
HXC02
Level Validity
(NSR)
HXC03
SL‑Fit ≤ 10$
(NSR)
HXC04
Range Zone Lock
(MID)
HXC05
CFK Stabilization
(CFK)
HXC06
Rejection Close (Pull/Range)
(Pull/Range)
HXC07
Order Type Lock
(MIR/NSR)
HXC08
No V‑Shape Base/Compression
(NSR)
HXC09
Break Close Validity
(UCB)
HXC10
Big Break Candle Filter ≥ 8$
(NSR)
HXC11
Acceptance after Break
(UCB/NSR)
HXC12
REB Block
(REB)

Stage Guide (what each HXC does)

# Stage Code Unique Confirmation Parent Setups Short Description Pass / Fail Method
1 Context HXC01 State Lock (NSR) All Setups Only trade when the market regime is objectively clear (trend up / trend down / range). Pass: regime can be proven by structure. Fail: unclear regime → log NSR and stand down.
2 Level HXC02 Level Validity (NSR) All Setups Your level/zone must be real (key high/low, demand/supply, or valid range edge), not noise. Pass: level is identifiable and has clean prior reaction/structure. Fail: guessing/noise → NSR.
3 Risk HXC03 SL‑Fit ≤ 10$ (NSR) All Setups Stop placement must match the fixed 10$ invalidation constraint. Pass: invalidation is defined first and |Entry−Invalidation| ≤ 10$. Fail: >10$ or no invalidation → NSR.
4 Range HXC04 Range Zone Lock (MID) RGT / RBT In a range you only trade the outer zones (Top/Bottom 20%). Mid‑range is forbidden. Pass: entry is inside Top/Bottom 20% (prefer within ±1$ of the boundary). Fail: mid‑band entry → MID.
5 Safety HXC05 CFK Stabilization (CFK) Pull / Range If the move into the level/edge is sharp, you must wait for stabilization before entry. Pass: stabilization criteria are met (cool‑off / overlap / contraction). Fail: entry before stabilization → CFK.
6 Trigger HXC06 Rejection Close (Pull/Range) BUP / BRP / RGT / RBT A pull/range entry requires a confirmed rejection close. Pass: rejection candle closes with direction + midpoint confirmation. Fail: no confirmed close → NSR.
7 Execution HXC07 Order Type Lock (MIR/NSR) All Setups Order type must match the setup (stop/limit/market) to avoid MIR/NSR violations. Pass: correct order type is used for the chosen setup. Fail: wrong order type → MIR or NSR (depending on case).
8 Structure HXC08 No V‑Shape Base/Compression (NSR) BUB / BRB Break setups require a base/compression before the break (no V‑shape breaks). Pass: a base exists (≥3 execution candles with overlap). Fail: V‑shape break → NSR.
9 Trigger HXC09 Break Close Validity (UCB) BUB / BRB A break entry requires a valid break candle close beyond the level (not a wick break). Pass: close beyond level + body ≥50% + close in top/bottom 25%. Fail: pre‑close/wick → UCB.
10 Filter HXC10 Big Break Candle Filter ≥ 8$ (NSR) BUB / BRB A huge break candle blocks direct entry. Only a controlled retest may be traded. Pass: if candle ≥8$, you wait for retest and still respect SL‑Fit ≤10$. Fail: direct chase entry → NSR.
11 Confirmation HXC11 Acceptance after Break (UCB/NSR) BUB / BRB After the break, acceptance is mandatory (second close or retest‑hold confirmation). Pass: acceptance confirmed. Fail: no acceptance → UCB/NSR.
12 Discipline HXC12 REB Block (REB) All Setups No re‑entry after BE/SL unless a fresh setup forms (new structure, new trigger). Pass: a new setup is present. Fail: re‑entering the same idea/level → REB.

Kill‑Switch Decision Path (5 steps)

State Lock

Does the market regime (trend or range) match the chosen setup?

Level / Zone Validity

Validate the key level/zone or the range edge zones (Top/Bottom 20%).

Safety & Structure

Require stabilization after sharp moves (pull/range) or a base/compression before breaks.

Trigger Confirmation

Confirm rejection close (pullback) or a valid break close (break).

Risk & Discipline

Enforce SL‑Fit (10$), acceptance after breaks, and the strict no‑reentry rule (REB).

Place Order

You place an order only after every required confirmation above has passed. If you cannot name the setup and confirmations, you do not click.

Confirmation‑to‑Setup Matrix

Unique Confirmation BUP (Buy) BUB (Buy) BRP (Sell) BRB (Sell) RGT (Sell) RBT (Buy)
HXC01 State Lock
HXC02 Level Validity
HXC03 SL‑Fit = 10$
HXC04 Range Zone Lock (MID)
HXC05 CFK Stabilization
HXC06 Rejection Close (Pull/Range)
HXC07 Order Type Lock
HXC08 No V‑Shape Base/Compression
HXC09 Break Close Validity
HXC10 Big Break Candle Filter ≥ 8$
HXC11 Acceptance after Break
HXC12 REB Block

Consistency Audit

Each of the 6 setups has exactly 5 kill‑switch confirmations (no ambiguity, coach‑judgeable).
Break setups (BUB/BRB) require Break Close and Acceptance (UCB protection via HXC09/HXC11).
Range setups (RGT/RBT) are Limit‑Only and use Zone Lock (Top/Bottom 20%) (MIR/MID protection via HXC07/HXC04).
All setups have structural invalidation and are controlled by SL‑Fit ≤ 10$ (HXC03).
CFK Stabilization blocks entries after sharp moves (HXC05).
REB Block blocks re‑entry after BE/SL without a new setup (HXC12).
Minute‑Lock is explicit: Context=M15 and Execution=M5. Outside this frame → NSR.
A decision path + matrix exists to make execution a single, consistent workflow.

Setup Checklists

Each setup has exactly 5 confirmations. Use the checkboxes as an execution checklist (stored locally in your browser).

BUP Bull Pull
Buy • Exactly 5 kill‑switch confirmations
HXC01 State (NSR) Mandatory 100
Only if the context is truly Trend Up (no close below the protected HL).
HXC02 Level (NSR) Mandatory 100
The pullback must reach a valid Demand Zone (not noise).
HXC05 CFK (CFK) Mandatory 85
If the drop into demand is a sharp move → entry is forbidden until stabilization.
HXC06 Rejection Close Mandatory 90
Rejection candle must fully close bullish: Close > previous Close and Close ≥ candle midpoint.
HXC07+HXC03+HXC12 Execution + Risk (NSR/REB) Mandatory 100
After rejection only: Buy Stop above the High or Buy Limit inside the zone; SL‑Fit ≤ 10$. Re‑entry after BE/SL without a new setup is forbidden (REB).
BUB Bull Break
Buy • Exactly 5 kill‑switch confirmations
HXC01 State (NSR) Mandatory 100
Only if the context is truly Trend Up.
HXC02 Key Level (NSR) Mandatory 100
The level must be a real Key High within the current context.
HXC08 No V‑Shape (NSR) Mandatory 85
Before the break, at least 3 execution candles below the level with overlap are required (base/compression).
HXC09 Break Close (UCB) Mandatory 95
Break candle must be valid: Close ≥ 1$ above the level + body ≥ 50% of range + Close in the top 25% of the candle.
HXC11+HXC10+HXC03+HXC12 Acceptance + Risk (UCB/NSR/REB) Mandatory 90
Acceptance is mandatory: either a 2nd close above the level or a retest‑hold. If the break candle ≥ 8$ → no chase; retest only. SL‑Fit ≤ 10$. No re‑entry without a new setup (REB).
BRP Bear Pull
Sell • Exactly 5 kill‑switch confirmations
HXC01 State (NSR) Mandatory 100
Only if the context is truly Trend Down (no close above the protected LH).
HXC02 Level (NSR) Mandatory 100
The pullback must reach a valid Supply Zone.
HXC05 CFK (CFK) Mandatory 85
If the rise into supply is a sharp move → entry is forbidden until stabilization.
HXC06 Rejection Close Mandatory 90
Rejection candle must fully close bearish: Close < previous Close and Close ≤ candle midpoint.
HXC07+HXC03+HXC12 Execution + Risk (NSR/REB) Mandatory 100
After rejection only: Sell Stop below the Low or Sell Limit inside the zone; SL‑Fit ≤ 10$. Re‑entry after BE/SL without a new setup is forbidden (REB).
BRB Bear Break
Sell • Exactly 5 kill‑switch confirmations
HXC01 State (NSR) Mandatory 100
Only if the context is truly Trend Down.
HXC02 Key Level (NSR) Mandatory 100
The level must be a real Key Low within the current context.
HXC08 No V‑Shape (NSR) Mandatory 85
Before the break, at least 3 execution candles above the level with overlap are required (base/compression).
HXC09 Break Close (UCB) Mandatory 95
Break candle must be valid: Close ≥ 1$ below the level + body ≥ 50% of range + Close in the bottom 25% of the candle.
HXC11+HXC10+HXC03+HXC12 Acceptance + Risk (UCB/NSR/REB) Mandatory 90
Acceptance is mandatory: either a 2nd close below the level or a retest‑hold. If the break candle ≥ 8$ → no chase; retest only. SL‑Fit ≤ 10$. No re‑entry without a new setup (REB).
RGT Range Top
Sell • Exactly 5 kill‑switch confirmations
HXC01 State (NSR) Mandatory 100
Only if the market is objectively in a Range (not trending).
HXC04 Zone (MID) Mandatory 85
Entry must be inside the Top 20% zone of the range (RangeTop down to RangeTop − 0.2×Height).
HXC07 Order (MIR) Mandatory 80
Limit‑only: Sell Limit at/inside the zone edge. Market entries inside the range are forbidden (MIR).
HXC06+HXC05 Rejection Close + CFK (CFK) Mandatory 90
Rejection candle must close bearish (confirmation close required).
HXC03+HXC12 Risk (NSR/REB) Mandatory 100
SL‑Fit ≤ 10$ and REB block applies: no re‑entry after BE/SL without a new setup.
RBT Range Bottom
Buy • Exactly 5 kill‑switch confirmations
HXC01 State (NSR) Mandatory 100
Only if the market is objectively in a Range (not trending).
HXC04 Zone (MID) Mandatory 85
Entry must be inside the Bottom 20% zone of the range (RangeBottom up to RangeBottom + 0.2×Height).
HXC07 Order (MIR) Mandatory 80
Limit‑only: Buy Limit at/inside the zone edge. Market entries inside the range are forbidden (MIR).
HXC06+HXC05 Rejection Close + CFK (CFK) Mandatory 90
Rejection candle must close bullish (confirmation close required).
HXC03+HXC12 Risk (NSR/REB) Mandatory 100
SL‑Fit ≤ 10$ and REB block applies: no re‑entry after BE/SL without a new setup.
{{massage_and_class_chat.message}}
{{massage_and_class_tariff.message}}